Technical Requirements of Stainless Steel Water Tank (Part One)
- Jun 11, 2020
- Hits: 137
1. Equipment manufacturers must have the sanitary license for stainless steel water tanks issued by National Health and Family Planning Commission of China. 2. Type inspection report of stainless...
The classification and characteristics of storage tanks
- May 09, 2020
- Hits: 1738
Introduction A storage tank is a container for storing oil products. It is the main equipment of the oil depot. At present, the common oil storage tanks are mainly vertical cylindrical tanks. Today we...
Vertical vessel classification, main components and their functions
- Apr 27, 2020
- Hits: 872
As an important equipment for vapor-liquid and liquid-liquid mass and heat transfer, vertical pressure vessel is widely used in the separation of materials in industries such as oil refining, petrochemicals,...
Introduction to anti-corrosion technology of petrochemical storage tanks
- Oct 14, 2019
- Hits: 117
Storage tanks for petrochemical products, as an important device for storing petrochemical products, play an irreplaceable role in the refining and storage of petrochemical products. However, through...
The knowledge of pressure vessel classification and its safety accessories
- Oct 14, 2019
- Hits: 320
First, according to the design pressure, pressure vessels can be classified into: 1. Low pressure (L) vessel: 0.1MPa ≤ P < 1.6 MPa 2. Medium pressure (M) vessel: 1.6 MPa ≤ P < 10 MPa...
Pressure vessel -- titanium welding
- May 17, 2019
- Hits: 221
Titanium has a small specific gravity (4.5), high strength, good resistance to high and low temperatures, and excellent crack resistance and corrosion resistance in wet chlorine gas. The mechanical properties...
A guide of materials for cryogenic pressure vessels (part three)
- May 05, 2019
- Hits: 171
6. Cold deformation The cold deformation reduces the toughness of the steel, and the strain aging deteriorates the low-temperature toughness, and the brittle transition temperature increases. Therefore,...
A guide of materials for cryogenic pressure vessels (part two)
- Apr 29, 2019
- Hits: 306
2. Chemical composition For steels used for cryogenic pressure vessels, increasing the carbon content will increase the brittleness of the material and the brittle transition temperature. Therefore,...
A guide of materials for cryogenic pressure vessels (part one)
- Apr 25, 2019
- Hits: 288
The design of cryogenic pressure vessels is focused on material selection and, correspondingly, certain restrictions on manufacturing and construction. The steel used for the pressure components of the...
Questions and analyses of pressure vessel manufacture (part two)
- Apr 18, 2019
- Hits: 113
2. Deformation problem The deformation of the pressure vessel seriously affects the rigor and reliability of the use, which in turn affects the safety of the pressure vessel during operation. The manufacturing...
Questions and analyses of pressure vessel manufacture (part one)
- Apr 16, 2019
- Hits: 116
As the economy and technology level of China has grown rapidly, from design to manufacturing and maintenance, pressure vessels made in China have been improved and even stepped into the frontier of the...
Three kinds of failure modes of pressure vessels
- Apr 03, 2019
- Hits: 4147
The failure of the pressure vessel is a state in which the damage is accumulated to a certain extent, and the strength, rigidity or function of the pressure vessel cannot meet the requirements of use....
English
Español
русский